If you need a cure for insomnia, you can start the series here. The next major sub-assembly to tackle is the Vertical Stabilizer (VS). It is very similar to the Rudder, except for where it is different. For starters, there is no skin rolling with this structure. Secondly, there are considerably more parts in the VS. I am used to the way that Van's does their Vertical Stabs, I have built several of them (RV-7, RV-12, RV-9, RV-8). On the RVs, the VS stab skin is all one pie

With the inventory almost complete, I finally get to start on the fun part. It took some time to work through all of the hardware, but I think it will be time well spent int he long run. This is basically all of the hardware for the kit. Pictured above are almost all of the Rivets, Bolts, Nuts, Washers, Screws and other hardware for the whole kit. I do have some separated out for the wing kit, but this is mostly all of it. All of that hardware fits in the Galley Cart with ro